Everything you need to know about our Services
A Section 63 audit is an assessment required under the Climate Change (Scotland) Act 2009. It evaluates the energy performance and greenhouse gas emissions of non-domestic buildings over 1,000 square meters built before 2002.
A Section 63 audit is required when a qualifying building is sold or leased to a new occupier.
The audit involves an energy assessment of the building, resulting in an Action Plan that outlines measures to improve energy efficiency and reduce emissions.
Only trained and accredited commercial EPC (Energy Performance Certificate) assessors can conduct a Section 63 audit.
The Action Plan includes recommendations for energy-saving improvements, such as upgrading lighting, heating systems, and insulation.
Property owners must complete the recommended improvements within a specified timeframe, typically set out in the Action Plan.
Failure to comply with the Action Plan can result in fines, typically around £1,000 for each failure.
The cost varies depending on the size and complexity of the building. For an accurate quote, it’s best to contact a certified assessor.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
An SDEM (Simplified Building Energy Model) calculation is a method used to assess the energy performance of non-domestic buildings. It calculates the monthly energy consumption for space heating, cooling, water heating, ventilation, and lighting, as well as the total CO2 emissions from the property.
SDEM calculations are required to ensure that new commercial buildings and certain extensions comply with Building Regulations. They help to demonstrate that the building meets energy efficiency standards and has a lower Building Emission Rate (BER) than the Target Emission Rate (TER).
The time required for an SDEM calculation depends on the size and complexity of the building. It can take anywhere from a few days to a couple of weeks.
The cost of an SDEM calculation varies based on the size and complexity of the building. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
Portable Appliance Testing (PAT) is the process of examining electrical appliances and equipment to ensure they are safe to use. This includes both visual inspections and testing with specialized equipment.
PAT helps to prevent electrical accidents by identifying potential hazards in electrical appliances. It ensures that appliances are maintained in a safe condition, reducing the risk of electrical fires and shocks.
While the Electricity at Work Regulations 1989 require that electrical equipment be maintained in a safe condition, they do not specify that PAT must be done or how frequently. However, regular PAT can help demonstrate compliance with these regulations.
The frequency of PAT depends on the type of equipment and the environment in which it is used. For example, equipment used in harsh environments like construction sites may need more frequent testing than equipment in an office.
PAT should be carried out by a competent person who has the necessary knowledge, training, and equipment to perform the tests. This can be a qualified electrician or a trained member of staff.
Any electrical appliance that can be moved and plugged into an electrical outlet should be tested. This includes items like kettles, computers, and power tools.
If an appliance fails the PAT test, it should be removed from service immediately and either repaired or replaced. The failure should be documented, and the appliance should not be used until it passes a subsequent test.
Ensure that all appliances are accessible and provide any relevant documentation, such as previous PAT records. It’s also helpful to label appliances with their last test date.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
The duty to carry out a Fire Risk Assessment falls on the employer, owner, or occupier of the premises. This includes ensuring that the assessment is carried out by a competent person.
A Fire Risk Assessment should be reviewed regularly, especially when there are significant changes to the building, its use, or occupancy. It is recommended to review the assessment at least annually.
The assessment should cover:
In Scotland, the duty to carry out a Fire Risk Assessment is imposed by the Fire (Scotland) Act 2005. The assessment must identify risks to the safety of employees and others in respect of harm caused by fire in the workplace.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
The duty to carry out a Fire Risk Assessment falls on the employer, owner, or occupier of the premises. This includes ensuring that the assessment is carried out by a competent person.
The key steps include:
A Fire Risk Assessment should be reviewed regularly, especially when there are significant changes to the building, its use, or occupancy. It is recommended to review the assessment at least annually.
The assessment should cover:
In England, the duty to carry out a Fire Risk Assessment is imposed by the Regulatory Reform (Fire Safety) Order 2005. The assessment must identify risks to the safety of employees and others in respect of harm caused by fire in the workplace.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the contact us form on their website.
Regular maintenance ensures that fire extinguishers are functional and reliable, reducing the risk of failure during a fire emergency. It also helps comply with legal safety requirements.
Fire extinguishers should be serviced at least once a year. Some types may require more frequent checks, especially in high-risk environments.
If a fire extinguisher fails an inspection, it should be removed from service immediately and either repaired or replaced. The failure should be documented, and the extinguisher should not be used until it passes a subsequent test.
Ensure that all fire extinguishers are accessible and provide any relevant documentation, such as previous maintenance records. It’s also helpful to label extinguishers with their last service date.
The cost varies depending on the number and type of extinguishers, as well as the specific services required. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
Fire alarm testing involves regular checks and maintenance to ensure that fire alarm systems are functioning correctly and will alert occupants in the event of a fire.
Regular testing ensures that fire alarm systems are reliable and effective, helping to prevent loss of life and property damage during a fire emergency. It also helps comply with legal safety requirements.
Fire alarms should be tested weekly with a short functional test and bi-annually with a full system inspection and test.
Testing involves simulating a fire condition to check that the alarms sound correctly and that the system communicates with any connected monitoring services. It also includes visual inspections to ensure the system components are free from damage and properly maintained.
Testing should be carried out by a competent person, usually a certified technician, who has the necessary training and equipment to perform the checks and servicing.
In the UK, the Regulatory Reform (Fire Safety) Order 2005 requires that fire alarm systems be maintained in an efficient state, in efficient working order, and in good repair.
If a fire alarm fails a test, it should be repaired or replaced immediately. The failure should be documented, and the alarm should not be used until it passes a subsequent test.
Ensure that all fire alarm components are accessible and provide any relevant documentation, such as previous test records. It’s also helpful to inform staff when the test will be conducted.
The cost varies depending on the size and complexity of the system, as well as the specific services required. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
Regular testing ensures that emergency lighting systems are reliable and effective, helping to prevent panic and ensure safe evacuation during an emergency. It also helps comply with legal safety requirements.
Testing involves simulating a power failure to check that the emergency lights come on and stay on for the required duration. It also includes visual inspections to ensure the lights are free from damage and clean.
If an emergency light fails a test, it should be repaired or replaced immediately. The failure should be documented, and the light should not be used until it passes a subsequent test.
Ensure that all emergency lights are accessible and provide any relevant documentation, such as previous test records. It’s also helpful to label lights with their last test date.
The cost varies depending on the number and type of lights, as well as the specific services required. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the contact us form on their website.
A Display Energy Certificate (DEC) provides an energy rating for public buildings based on their actual energy usage over the past 12 months. The rating ranges from A (most efficient) to G (least efficient).
DECs help raise public awareness about the energy efficiency of buildings and encourage improvements in energy performance. They also provide transparency about a building’s energy use.
A DEC shows the building’s energy rating, total CO2 emissions, and the actual energy consumption for heating, lighting, and other services. It also includes a comparison with benchmarks for similar buildings.
The cost of a DEC varies depending on the size and complexity of the building. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
A Legionella risk assessment is a thorough evaluation of your water systems to identify and manage the risk of Legionella bacteria, which can cause Legionnaires’ disease. This assessment helps ensure your water systems are safe and compliant with health and safety regulations.
The cost of a Legionella risk assessment can vary depending on the size and complexity of your water systems. It’s best to contact a professional service provider for a detailed quote.
The duration of a Legionella risk assessment depends on the size and complexity of your premises. Typically, it can take anywhere from a few hours to a full day.
You will usually receive the risk assessment report within a few days after the assessment is completed. The report will detail the findings and provide recommendations for managing any identified risks.
After receiving the risk assessment report, you should implement the recommended control measures to manage and reduce the risk of Legionella. This may include regular monitoring, maintenance, and cleaning of your water systems.
If Legionella bacteria are detected in your water system, immediate action is required to control and eliminate the bacteria. This may involve disinfection, system modifications, and ongoing monitoring to prevent recurrence.
A Commercial Energy Performance Certificate (EPC) provides an energy efficiency rating for a commercial building, ranging from A (most efficient) to G (least efficient). It includes recommendations for improving the building’s energy performance.
A Commercial EPC is required by law when a property is constructed, sold, or leased. It helps potential buyers or tenants understand the energy efficiency of the building and its potential energy costs.
A Commercial EPC is valid for 10 years from the date of issue.
Failure to provide a Commercial EPC can result in fines ranging from £500 to £5,000, depending on the rateable value of the building.
The EPC rating is determined by a qualified energy assessor who evaluates the building’s energy use, including heating, cooling, lighting, and insulation. The assessor then uses the Simplified Building Energy Model (SBEM) to calculate the rating.
Yes, certain buildings are exempt from needing a Commercial EPC, including listed buildings, temporary buildings used for less than 2 years, places of worship, and industrial sites with low energy usage.
Improving your building’s EPC rating can involve measures such as upgrading insulation, installing energy-efficient lighting, improving heating and cooling systems, and using renewable energy sources.
The cost of a Commercial EPC varies depending on the size and complexity of the building. For a detailed quote tailored to your specific needs, please call Adegrity at 0800 448 0208 or fill in our contact us form.
To get a Commercial EPC, you need to arrange a property assessment with one of Adegrity’s qualified energy assessors. Contact us to schedule an appointment and ensure your building complies with energy efficiency regulations.
The process involves an on-site assessment by a qualified energy assessor, who will evaluate the building’s energy use and gather necessary data. The assessor will then generate the EPC and provide recommendations for improving energy efficiency.
For more information or to schedule your Commercial EPC assessment, call us at 0800 448 0208 or fill in our contact us form.
Access Audits are crucial for identifying barriers to accessibility and ensuring that buildings and services are inclusive for everyone. They help organizations comply with the Equality Act 2010 and improve the overall user experience for people with disabilities.
An Access Audit involves a detailed examination of the physical environment, including entrances, exits, pathways, signage, and facilities. The audit assesses how well these elements meet the needs of people with various disabilities and provides recommendations for improvements.
After an Access Audit, you will receive a detailed report outlining the findings and recommendations for improving accessibility. This report can be used to create an action plan for implementing the necessary changes.
The cost of an Access Audit varies depending on the size and complexity of the building or service being assessed. For an accurate quote, please contact Adegrity.
You can contact Adegrity for a quote by calling 0800 448 0208 or by filling out the Contact Us form on their website.
Adegrity is a Limited Company registered In Scotland with Company Number: SC720397.
Please fill in your details below and we will come straight back to you with a quotation for your requested services.
We use cookie to improve your experience on our site. By using our site you consent cookies.
